Dongguan Kaimiao Electronic Technology Co., Ltd
COOPERATE WITH US, EASIER AND MORE ASSURED
Add to Cart
| Type: | Car Auto Parts / Auto Electronics | Product Name: | Power Tailgate Liftgate |
| Car Model: | Toyota Majesty / Granvia | Year: | 2019+ |
| Description: | Double pole with orignal suction lock | Installation: | Plug and Play |
| Application: | Car Trunk | Service: | in stock / ODM / OEM |
| Rated Voltage: | 12V | Operating Voltage: | 9-16V |
| Working Current: | 5A | Quiescent Currenty: | <2mA |
| Operating Temperature: | -30℃~80℃ | Warranty: | 1 year |
1. Intelligent Induction: Anti-pinch force setting / Anti-collision force setting. (When the system detects the intention of the car owner of manually open and close the door, power liftgate system will be in the auxiliary state automatically.
2. Intelligent Speed Control: Through intelligent control such as slow start and decelaration, it can ensure that the tailgate runs smoothly and impact of the system is slowed down. At the same time, the lift of the motor is prolonged.
3. Abnormal Scene Processing: Double pole load balancing. When a pole fails, the door can be prevented from being deformed. When the tailgate fails in a special scene, the system will automatically adjust the closing effort.
4. Fault Detection: When the drive circuit is faulty (low-voltage alarm, over-current protection), it will automatically cut off / automatically recover to ensure the safety of vehicles and equipment.
5. Ultimate Energy Saving: Ultra-low quiescent current (Standby Current: 1 mA). It can avoid that the vehicle can not start without power due to long-term parking.
Using a power liftgate is straightforward and convenient. Here’s a step-by-step guide on how to operate it effectively:
1. Using the Key Fob
Open the Liftgate:
Press the designated button on your key fob that features the liftgate icon. This will automatically unlock and open the liftgate.
Close the Liftgate:
Press the same button again to close the liftgate, or use the button located inside the vehicle if available.
2. Using the Interior Controls
Open the Liftgate:
Locate the liftgate button on the dashboard or center console and press it to open the trunk.
Close the Liftgate:
Press the same button again to close the liftgate.
3. Using the Liftgate Itself
Open the Liftgate:
If your liftgate has a button on the liftgate itself, press it to open. This is usually located near the center or on the left side.
Close the Liftgate:
To close, press the button on the liftgate again or push the liftgate down manually if needed.
4. Hands-Free Operation
Open the Liftgate:
With your hands full, approach the rear of the vehicle and kick your foot under the rear bumper (if equipped with a hands-free feature). The liftgate should automatically open.
Close the Liftgate:
To close, either press the button on the liftgate or use the key fob as mentioned earlier.
5. Adjusting Opening Height (if applicable)
Set the Height:
Open the liftgate to the desired height, then press and hold the height adjustment button (usually found on the liftgate or inside the vehicle) until you hear a beep. This sets the new height.
Resetting the Height:
To reset, repeat the process and set a new height as desired.
Check for Obstructions: Always ensure the area around the liftgate is clear before operating to avoid accidents.
Obstruction Sensors: If the liftgate encounters resistance while closing, it should automatically stop and reverse. If this doesn’t happen, check the sensors for any blockages.
Manual Override: In case of a malfunction, most power liftgates can be operated manually. Consult your vehicle’s owner manual for instructions.
Using a power liftgate enhances convenience when accessing your vehicle's cargo area. Familiarize yourself with the specific controls and features of your liftgate model to maximize its functionality. Enjoy the ease and accessibility it provides!
Q1. What are your terms of packing?
A: Generally, we pack our goods in carton box, suitable for shipping container.
Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your parameters.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the sample fee is required.